Відео

It doesn't matter whether it was due to the shaft. . The imbalance can be removed with the diamond device "Tormek TT50" and the grinding stone can be dressed like new. Then there is no more imbalance and it runs smoothly again. At most you could just replace the main shaft bearing Greeting

Nonsense. It doesn't matter whether it was due to the shaft. . The imbalance can be removed with the diamond device "Tormek TT50" and the grinding stone can be dressed like new. Then there is no more imbalance and it runs smoothly again. At most you could just replace the main shaft bearing Greeting

Hello, I want to know How can salt water pass through label paper? Please help clarify this for me. Thank you.

Hey mate thanks for the info, really helpful!👌 do you know the name for stencils on the brother printer, for some reason the link isn’t working for me, thank you very much mate!

Is that as small as they print?

Thanks for teaching me how to use this machine although I don't have any but I believed I'm going to have it one day, thank you once again.

I really need it anyone selling it should inbox me

I need this machine where can I buy it from

I was really lucky and found a t8 at a pawn shop with every single attachment available for 150$!!!! The only thing needed was a replacement leather strop

4:07 use a lube substance mix it keeps it on the ring

Thanks. I found your video helpful to see the upgrades.

Very good work .me personally I prefer to attach the skales to the knife first then shape the handle Wild attached instead of individually, cutting out each side I tend to make a lot of mistakes doing it that way, and less mistakes, actually attaching them first, then shaping them but hey to each their own me personally I just felt like I made fewer mistakes, attaching the scale first then shaping versus cutting out each individual scale to match sides great work on your blade. I found your video informative.👍🏽

info: that thing works really great when the stopping force is not to big so when you are able to grab the De-speeder and hold up against the momentum of the lathe it works but after M12 it gets really hard to get a hold of. Thy for sharing this manificent idea =)

Can i ask.. Where to buying letter this Machine

Nick, just got one of these and did the deep cleaning also - a problem is that the clamp/vise rotates on its axis without a lock - I see zero on the right at 3 o'clock but there is no way for me to tighten a screw or clamp to keep it there - what is missing ? - help . . . .

You say you want 3000watts but if u had 32amp supply would the wire still melt?@6000watt

I wouldn't worry about copying other makers on youtube, your followers may not follow everyone you do so may not see how they do things, so it's good to share. You may have improved loads now with the WA handles, however Simple Little Life has excellent videos on making/ fitting WA handles. 🙂

Did you end up making the knife for your wife? 16:55

Use a pair of channel lóck pliers that's what I use to take the disk off

Hi may i know the voltage and current used ?

I added vinegar and it works better and I'm thinking a spray adhesive on the brother tape might work?

Could you use one of these for domestic bedroom/kitchen fitting

Hello Nick , very good video! Thanks! What is that orange motor in the top right corner? A guy of mine puts a corrugated washer behind the rubber impeller, a thin corrugated 12mm washer and doesn't tighten the nut/bolt quite so tightly. Then the bike won't wobble quite as much

How can i make textures please...

I just got through taking off the wheel on my SuperGrind 2000. Your way of removing the wheel is the easiest way to go. Definitely a design flaw by Tormek to not use a Stainless Steel shaft (as all new shafts are)to prevent the inevitable rust freeze of the shaft to the grindstone. I did watch an instructional video by two Tormek technicians on their system. They recommended placing some machine grease in the plastic bushings. I'm awaiting the arrival of the new SS shaft. Cheers from across the pond. Don M

Brilliant video. I've just picked one up after seeing you're video.

Very useful video for me, I like the idea you could copy the printed picture. If you where to take the tip from a ballpoint pen you might be sble to mount it on the scriber. My machine has a diamond point and it would copy your picture more finely, I'm not sure but it may also engrave the netal better .Thanks for a great video

Glad I found your video, I just got one 2 days ago and have been trying to work it out. Great info and visuals thanks for posting. Now to watch part two

Great couple of videos and has convinced me to buy the same machine.

Is it the same as those „Tapmatic“ threading attachments?

Good job

If you want to engrave a shape, such as you have tried, make a former/pattern. I use a base of 20thou styrene, cut out my pattern in the same material and stick it to the base. Use a round blunt follower and go round your pattern. You can make the pattern 2 ,3 or 4 times bigger than the finished work to improve the result. Note that the follower and cutter need to be in the same ratio as the pattern and shape. For a pattern twice the size of your shape the follower has to be twice the size of the cutter. Pantograph Services will grind cutters to any shape/size. I have some parallel cutters from 0.5mm to 2mm in 0.5mm increments. The problem you would have with your leaf shape is getting a true 'V' - even a 0.5mm cutter would leave a curved base but you could file it out.

Hello!! Just popping in to see how you are doing with the Hamon develoupment. Hope you are well...JPH

Have you had to replace the motor capacitor yet?

Bloody great video, so well explained 👌

IVery interesting. Also, refreshing to see a video about fixing mistakes! My kiln is at the design stage, so this is useful. I now intend to make the steel frame so that it can be dismantled for doing repairs - some welding but also some bolts. Thanks!

This habaki does not fit the blade at the edge. Nor particularly well at the spine. But it does sort of look like a habaki. We salute you.

I got both printers and this is exactly what I needed , thank you.

Keep them coming very good thank you

Beautiful 😍 - if you want to use it on a cutting board, it’s an option to remove the exess material on the heel.

Thank you Sir, for your video, I found that the Tormek TT-50 Truing and Dressing Tool - Keeps your Stone Round and Flat is a worthwhile investment. A previous owner must have used the stone without water causing a gouge in the wheel. The diamond dressing tool brought it back flat and round. After watching ALL the instructional videos that Tormek has posted on UA-cam and what I have learned from them, I would NOT let just anyone use my Tormek. And yes, I have spent 5 times as much on the various SuperGrind 2000 attachments from Amazon that I need for my wood carving tools. The Tormek TT-50 Truing and Dressing Tool was the last accessory I purchased but it should have been the FIRST. It looks like the E-Z Lock shaft may be next. LOL

Beautifully done! I like a #short that tells a story 👍

Excellent work as always!!

Are you still happy with your purchase?

I appreciate the review! I'm considering ordering one of these for my 10m² woodwork shop.

You may find that the old shaft was not the problem but that the old wheel had never been ‘trued’. The stone grader will make the wheel flat but not round / concentric - to do they you need a diamond truing tool they tormek sell - pricy at about £80 (but then all tormek stuff is) but this should save your old wheel for general use if you so wish.

how do i make one that is not traditional but still japanese? do i need to go to japan?

Your mistakes (explained) are someone elses success.

A nice walk through. I had a few fails drilling out for the dowel on the pillar drill. I now use the lathe & let the point of the drill just protrude for the start of the tang.

Love this. I've not seen anyone put a mica window in an oven, and that's a great idea.